I finished my first hiking stick. :-) I'm not sure what kind of wood it is, but it is beautiful and it used to smell really good and sweet! Now it smells like the spar urethane that I sealed it with. :-/
Here's the process:
1. Go to a beautiful place (i.e. Olympic National Park)
2. Fall in love with a stick. For hiking, it helps if the stick is about shoulder height and relatively straight.
3. Strip off the bark. This is easier if the branch is still alive and wet. The bark comes off in long strips. If not, use a knife to whittle the stick. Be careful not to score the wood too deeply with a knife - this will make it harder to sand later.
4. Sand the wood using a fine sand paper. P220 to start, and P400 to polish.
5. Screw a hook into the bottom of the stick and hang it up in an open ventilated area using a string. WARNING: Hanging a stick from a string in your yard may confuse your housemates and neighbors. Just tell them it is an ancient kung fu training ritual.
6. Seal the wood. I used a clear spray can of spar urethane and put on three coats.
7. Cap the bottom. I used a copper plumbing cap from the hardware store. I then drilled a hole in the bottom and used a small screw to secure the cap. You can also use a rubber cap.
this kind of looks like a penis, doesn't it? :-/






